- April 6, 2017:
- May 4, 2017:
- May 5, 2017:
- May 6, 2017:
- May 25, 2017:
Subscribe to FVWG.ca Updates
Search By Category
Category Archives: Buy and Sell
Download (PDF, 282KB)
I recently had to take down a big leaf maple and a cedar on my property. Feel bad just chopping it up for firewood, and I have a bunch already anyways. Was wondering if you know of anyone who could make better use of the wood?
Right now I have (Dimensions listed are the diameter at […]
[ June 25, 2016; 9:00 am to 1:00 pm. ] A Note from Murray Sluys:
The Fraser Valley Woodturners Guild is hosting a Woodturners Estate/Garage Sale
Saturday, June 25th, 2016 from 9 am to 1pm
41762 Yarrow Central Road, Yarrow (Hwy 1 E past Abbotsford, take No 3 Rd Exit to Yarrow)
The families of the Herb Reeves and Gale Nolkowsky have asked the Guild to sell the tools of […]
A note from Tony Chan of Chanmanpokertables.com :
I am looking for someone to produce wood columns for pedestal tables. I would need around 2 per week depending on demand. Columns only, no feet unless you can supply claw toed feet. Please contact me with a quote or if you have any questions.
[Tony can […]
For Sale: Oneway Bowl Coring Set and Steady Rest
Oneway Coring Set includes:
Base Unit for 16 in. or 20 in. swing (with riser block)
Knife Set 1 – 3-3/4 in. depth and nominal 10 in. dia.
Knife Set 2 – 5 in. depth and nominal 12 in dia.
Diameters may be increased by about 2 in.
Cutter sharpening jig.
Excellent condition – […]
For Sale: Delta Lathe and Dust Collector
For sale: 1642 Delta lathe 16″ swing.
Head stock slides down the 58″ bed for convenience when turning bowls has a 1.5 hp variable speed motor equipment includes two chucks, cole jaw etc.
Price $1050.00 or best reasonable offer.
For sale: 1HP General dust collector with 1 micron filter like new, about three […]
Price reduced to $2500.- !!
I have a General Canada 26020 Electronic Variable Speed Wood lathe for sale, main spindle thread is 1 1/4″-8 and tool post diameter is 1″.
Items included are what is shown in the pictures, 4 prong drive center, tailstock live center, 12″ tool rest, 4″ tool rest, a right angle tool rest, a […]
My name is Darcy Mckay, and I am a new member of the guild, as well as a new teacher at a small private school in Aldergrove, and I am teaching wood shop. The school tried to run a woodshop program 6 years ago, but finances fell through and they had to cut the program after […]
For Sale: Wood – American Chestnut
Multiple sizes of good quality wood, 1/4 sawn;
1″ x 4″ to 12 ” x 8 ‘
2″ x 4″ to 12″ x 8’
4″ x 4″ x 8 ‘
Also some 4′ & 6’ lengths
3000 board feet of lumber – all wood is undressed.
Contact: Bill Johnson at 1 – 604-866-3937 for more information, price […]
GDE Error: Error retrieving file – if necessary turn off error checking (404:Not Found)
[ January 16, 2016; 10:00 am to 2:00 pm. ] Wood Turning Shop Sale
Long time GVWG member, Bob McConnell recently turned 90 and has decided to hang up his woodturning smock. On Saturday Jan 16th from 10:00 AM to 2:00 PM Bob will hold a sale of his woodturning gear from his home at:
#20 14888 24th Ave
All Guild members are welcome. Items include:
Nova DVR […]
8” table saw complete, probably Rockwell, cast iron top rusty but not deep rust. 10” Rockwell band saw in basically same condition. Not free but any reasonable offer accepted. Prefer to sell both to one party. Call Ed, 604-888-5967 or email firstname.lastname@example.org.
Craftex 6” Woodworking Jointer, Model B706
Motor: 1 HP 110/220 V RPM: 3450
Cutting Capacity: 6” x ½”
No of Knives: 3
Cutter Head Speed: 5000 RPM
Cutter Head Diameter: 2.56”
Floor Space Required: 57” x 12 ¼”
Approximate Weight: 240 lbs.
Knife Size: 6” x 5/8” x 1/8”
This heavy duty jointer has a bed size of 7” x 47”, cast iron construction […]
The Vicmarc VL175SH is an earlier version of the new VL240 currently offered by Vicmarc.
Swing over the bed: 360mm/14″,1000mm/40″ between centres. Speed
range 30-3000 with digital readout. Remote on/off control.
Comes with spur drive & live centre, tool rest, hand wheel & faceplate.
Weight 180Kg/400 lbs. Excellent cond’n.
Contact Keith: Kharvey@vip.net or (250)496-5423. Naramata BC
Small Turnings Wanted
After looking at your website, I am looking for someone who might be interested in a small project, turning a couple of items. These would be used as corner decoration where two pieces of miss-matched crown moldings would join.
I am in Walnut Grove and would like to speak to someone local if possible.
Thanks for […]
For Sale: Walnut Tree
We have a farm in Langley and had to cut down a walnut tree. We are wondering if your members would be interested in buying it. It’s kind of interesting because of the centre of dark wood and then the lighter
Please let me know if there is interest.
From Nicole Lambert
For Sale: Three mini lathes. All with 10” swing and 15 – 16” between centers. Two King lathes in as-new condition. Used only a few hours for students. One Jet lathe with a little more use but still very low hours. All well cared for. The kings are $275 obo and the Jet $225 obo. […]
FVWG’s Rose Engine Lathe auction
This Rose Engine Lathe is a Jon MaGill design and was very well constructed of MDF by FVWG members according to the plans and with a Jon MaGill parts kit. It includes: an x-y table, a 110v cutter frame and motor, an extra cutter frame, a couple of cutters and 4 UHNW rossettes. The Oneway […]
A note from Beverley Pears:
“Fraser Valley Members:
FREE Wood – Silver Maple
Yours for the taking but you will need a chainsaw
Keep the sidewalks and boulevards clear and clean
Move all your debris, limbs, off cuts to the pile that is already started
DO NOT LEAVE A MESS
SILVER MAPLE – 30 FEET long – 30 INCHES diameter
ON 194 Street BETWEEN 64 and 65 […]
For Sale – Bandsaw
14 inch import with riser block – cuts to 11-1/2 inches high.
3/4 HP motor, bearing guides, two speeds, tires replaced.
Spare blades, good running order.
Excellent for woodturning preparation. Asking $230.
Contact: David Broomhead